JAWS INSTALLATION ERRORS, MALFUNCTIONS AND FIX
Olufemi S.A. Bayode on January 1st, 2019 with 22 comments
TweetI’ve been a user of JAWS for years. In fact, my use of JAWS is equal to my kilometer in the journey of information and communication technology. Of course, it’s the first screen reader I ever used or let me say it’s the very first savior that freed me from the bond of unknown and the depth of impossibility plunged into by visual impairment. It’s being illuminating my path to being the pro, and everything I am and have today. However, it's not the first screen reader I ever installed on my personal portable computer though, and I use the JAWS screen reader occasionally in recent time, while using NVDA as my primary screen reader.
I feel that the reason for this switch isn’t right for this post because it will cause a deviation from the subject matter, nevertheless, I promise to discuss that with you in a post scheduled for later date. So, let me show you my discovery, and I’ll want to advise you to bookmark this page because its content will be updated from time to time to include new findings. You will always find this blog post handy as a JAWS user, instructor, assistive technology enthusiast or distributor
JAWS installation errors
Installation of the JAWS software is not different from other software. You only need to pay keen attention to information windows. This process shouldn't last more than three minutes to complete, although subject to the processing speed of your computer system and the size of its RAM. Then, you can activate the JAWS programme if you've acquired its license or activation code. You can do this via internet, activation cd or through a personnel, without which your software will only run for forty minutes upon starting up, and you'll need to restart your machine to begin afresh for another forty minutes. You may also think of crack but the down part is that you won’t be able to update the software or use some advance features like tandem and most importantly, put your computer at risk. Moreover, the installation may abort due to some varying issues. I’m going to tell you how you can solve these.
- JAWS RUNTIME ERROR
When your installation suddenly abort as a result of runtime error, this is because your computer lacks important update. Perhaps, there may be broken driver. So, you'll have to do the following to solve the problem:
- After a failed install, go to Installed updates. Search for KB2999226 to see if it is installed. This check is for diagnostic purposes.
- Reboot the computer system.
- Go to: Microsoft and download the correct installer for your operating system. The installer is the Update for Universal C Runtime in Windows.
- Run the installer. You must ensure that it completes successfully. A quick way would be to go to Installed Updates and search for KB2999226.
- Navigate back to the JAWS installation package and restart the installation process.
- The JAWS software programme should install correctly.
- ACCESSIBILITY DRIVER
If you see information like this: "The setup failed to process the "VideoAccessibility" component. Restart your computer and run the setup again.
If the error continues, contact technical support. Code: 80070643." upon the installation of the JAWS software, you have to:
- Search for the native display driver for your computer's VGA hardware and download it.
- Disable your antivirus temporarily to allow the installation.
- Install the accessibility driver
- Carefully allow the installation of a hardware during JAWS setup, if windows ask you in a security alert/prompt.
- UNKNOWN REASON
If the installation of your JAWS setup fails after installing to a point, you have to do the following:
- Press the WINDOWS key.
- Type cmd in the search box.
- Scroll to it with your UP or DOWN ARROW key if not in focus.
- Press the APPLICATION key or SHIFT+F10 for the menu. Then, scroll down to "run as administrator" with the DOWN ARROW key.
- The name of the setup file for Jaws jaws.exe as they change. Copy the file to Local Disk C.
- Return to the command prompt windows and type the following command in the cmd screen:
c:\Jaws.exe /silent
or,
c:\Jaws.exe /repair
- FIREWALL OR ANTIVIRUS:
This is a rare case regarding JAWS installation and activation. However, if your firewall software is preventing you from installing or activating JAWS on your computer system, just reconfigure the firewall to allow these files to run- Setup.exe, FSActivate.exe, CAUtil.exe, and CAUtil.enu. Then retry the installation procedure. Your JAWS should install and activate normally but if there's still a problem with activation, you have to visit JAWS Activation. Follow the detailed instruction on the webpage to retrieve the Activation License code and activate your JAWS software.
Most antivirus programme treats cracks and keygen like virus. The JAWS software also could have been corrupted with virus. In case of crack or keygen, you must disable your antivirus programme temporarily before installation. Thus, if the file isn't a crack or keygen, you must run a virus scan on your computer system. I will advise you to delete the file if the issue persists.
- INCOMPATIBILITY
When you receive an information: "You cannot install this product on this platform. Please, contact Freedom Scientific for a version that will run on your platform." This is very simple because you're trying to install a version of JAWS that does not match the version or type of your operating system. So, you have to do the following:
- Press the ENTER key to close the dialogue box on the computer screen if you have not done so.
- Crosscheck the version of the JAWS setup programme e.g. 11.0, 17.0, 2018, etc. You need to know the type also if it's 64 bit or 32 bit.
- Head straight to your Control Panel>System and Security>System to verify the version and type of your Windows operating system.
- Get the correct setup programme and install it.
JAWS MALFUNCTIONING
The JAWS screen reader is expected to function as the sight of every individual with visual impairment as regards computer access. It should allot them the opportunity to know the contents of their computer screen, movement of the cursor, computer status and much more. But any deviation from the aforementioned is regarded as malfunction. This makes computer experience monotonous and sometimes unproductive.
- LANGUAGE SWITCH
This incidence occurs during reading. For example, you are reading an English text but JAWS suddenly begins reading in a different language. This is because the JAWS language detection features is turned on; therefore, the screen reader regards those words as non-English in spite of having English characters visually. To correct this, you have to:
- Press the keystroke INSERT+V for the JAWS Vobosity Setting
- Scroll down to “language detection change” with the DOWN ARROW key
- Press the SPACE BAR key to uncheck the checkbox i.e. turn it off
- Press the ENTER key to close the vobosity setting
- JAWS COMPONENT AND DRIVER
Effect of a missing component or driver may manifest in readability problem, software crash or total software damage. For example, if the FSOCR is missing in the JAWS installation, there will be limit to what it reads while the loss of JFW.exe will render the software useless. However, the fixation of any of issues associated with JAWS component or driver requires running a repair with the JAWS setup application or installing the missing component.
- STARTUP
The JAWS application should start up automatically after installation or computer boots by default. If this doesn’t happen, you will have to:
- Press the keystroke WINDOWS KEY+R for the run dialogue box.
- Type JAWS with the version installed e.g. JAWS17
- Press the ENTER key.
- Then, switch to the JAWS application window with the keystroke ALT+TAB key
- Press the keystroke ALT+O for the Option menu
- Scroll down to “Basic…” with the DOWN ARROW key and activate it with the ENTER key.
- Navigate to “Automatic start JAWS” and activate with the SPACE BAR key.
- Use the SPACE BAR key to check the checkbox
- Press the TAB key twice to move to “start JAWS after log on screen for this user”
- Scroll to “Always” with the arrow keys.
- Press the ENTER key to close the option.
- Navigate to the OK button with the TAB key and activate with the ENTER key.
The application should start running.
This opens another set of options and focus is directly on “start JAWS at the log on screen checkbox.”
The JAWS software programme should be starting automatically each time you boot the computer system. But if it still refuses to start up, perhaps, the antivirus programme or Firewall of your computer system is blocking the screen reader. So, you have to add it to the exclusion list of your antivirus or reconfigure your Firewall to allow the running of JFW.exe file.
Tweet
